The Conver MC105-7 fills the gap between the small MC105-6 and the large MC105-10 weed harvesters. The machine is suitable for removing floating and rooted vegetation. The machine can also be used to remove floating refuse in small lakes, channels and other water courses.
A hydraulically driven U-shaped cutting unit with adjustable height helps you get wherever you want with this weed harvester. Even dense vegetation is not a problem. The cut vegetation is taken out of the water and brought on to the deck with a porous conveyor belt. There is a second storage conveyor belt on deck with a large storage capacity.
The machine is unloaded from the front. The operator thus keeps maximum overview and also retains full control of the machine. Harvested material can be removed via the front conveyor belt on to the embankment or on to a transport barge.
|DIMENSIONS WHILE WORKING (L X W X H)||11.0 x 3.45 x 3.6/3.1* m (*with cabin underneath)|
|HULL (L X W X H)||7.0 x 3.45 x 1.2 m, 4 mm steel, 3 compartments|
|LOADING CAPACITY||3,000 kg, 8.5 m3|
|DRAFT||0.45 m empty, 0.52 m loaded|
|FREEBOARD TO DECK LEVEL||0.35 m empty, 0.28 m loaded|
|MOWING DEPTH||0-1.3 m empty, 0-1.5 m loaded|
|MOWING WIDTH||2.4 m, ESM single working system|
|CONVEYOR BELTS||2.0 m wide, open stainless steel construction|
|UNLOADING HEIGHT||Up to 2 m above the waterline|
|COLOUR||Orange RAL2004 / Grey RAL7012|
|ENGINE||Water-cooled 4-cylinder diesel, approx. 79 hp at 2,400 rpm|
|EMISSION CLASS||Complies with local requirements|
|FUEL TANK||8 – 10 l/hr|
|COOLING SYSTEM||Box cooler|
|PROPULSION||Double 400 mm servo powered, 0.4 m high adjustable, tilting, anti-coiling augers|
|STEERING||Power steering with a 2 x 50° steering angle|
|PUMPS||Double axial flow, load-sensing pumps|
|FUEL TANK||160 L inhoud|
|HYDRAULIC TANK||250 L with double intake filter, return filter and box cooler|
|MAXIMUM SAILING SPEED||7 km/h|