The Conver C86 push boat was developed especially for cleaning up ponds and watercourses. The machine is particularly useful in situations where you cannot or may not work from the edges. The push boat can also be used to restore the bottom profile during the removal of silt.
The push boat is especially suitable for soft bottoms. It really comes into its own along relatively long, straight waterways. The C86 can currently be delivered as standard with push blades with a maximum working depth of up to 2.00 m and a working width up to more than 8.00 m. Vertical precision of up to 10 cm is possible with the push boat. The push boat has little trouble with large debris and obstacles. Large debris is usually pushed along with the rest. A hydraulic stop on the winch power prevents overloading.
Efficiency, durability and ease of use were the focal points in the development of the Conver C86. Naturally a number of tools are available for this machine, increasing the variety of jobs it can do.
|DIMENSIONS (L X W X H)
|8,00 x 1,76 x 1,42 m
|HULL (L X W X H)
|4,75 x 1,70 x 0,80 m
|3 mm Raex S400
|3300 kg (excluding implements)
|ca. 0.45 m
|Orange RAL2004 / Grey RAL7012
|Water-cooled 4 cylinder, 36 kW at 3000 rpm
|Complies with local requirements
|5 – 6 L/hr
|Two hydraulic winches with auto-spooling system
– Forward winch 5.000 kg, 12mm 6x36stk 240m, 12 m/min
– Reverse winch 2.500 kg, 10mm 6x36stk 260m, 24 m/min
|Height adjustable rear arm with a steering angle of 2x 50°
|One load-sensing pump and one gear pump with (semi-)proportional valves
|90 L with suction and return filter